​Huron MU6 Milling Machine w/ 3-axis Digital Readout

  1. Managing Director
  2. Managing Director
  3. Managing Director
  4. Managing Director
  5. Managing Director
  6. Managing Director
  7. Managing Director
  8. Managing Director
  9. Managing Director
  10. Managing Director

 Table size 2000 x 460mm w/1500mm travel. Cross travel 710mm, vertical 550mm. All angle head. Spindle taper 50 ISO. Twin pillar knee supports. Speeds to 2066 r.p.m. Weight approx. 4.5 ton. Fitted with 3-axis digital readout. Machine comes with 3 large bolt-on attachments for slotting, drilling and rack cutting. Also included is a geared drive box for use with dividing head. Lead and plug connected. On our floor. 

King Rich Turret Mill w/ 3 axis Digital Read Out and Tooling

  1. Managing Director
  2. Managing Director
  3. Managing Director
  4. Managing Director
  5. Managing Director
  6. Managing Director
  7. Managing Director
  8. Managing Director
  9. Managing Director
  10. Managing Director
  11. Managing Director
  12. Managing Director
  13. Managing Director
  14. Managing Director
  15. Managing Director
  16. Managing Director
  17. Managing Director
  18. Managing Director
  19. Managing Director
  20. Managing Director
  21. Managing Director
  22. Managing Director
  23. Managing Director
  24. Managing Director
Table size 1219 x 253 m/m. Fitted with Newell digital readout (as new). Infinitely variable speed control 60 to 4200 r.p.m. 3 -speed power down feed to spindle w/ 30 iso taper. Comes with huge amount of tooling across 2 x pallets as shown in the last 4 x photos including tilt table, horizontal arbor w/right angle drive attachment (in original box) and 230 m/m diam. rotary table among other items. This machine is in superb condition. Lead and plug ready to use. Full list of tooling below.
3-axis digital readout, these machines are not sold new with this included.
- Universal dividing head, tail-stock, steady jack and gears
- Angle plate (slotted) 310 x 230 x 200 m/m
- Swivel t-slotted table with hand lever adjust (graduated) 400 x 200 m/m
- Swivel base and tilting machine vice w/110 mm wide jaws
- Precision rotary table 230mm diam. with ROHM 4-jaw self-centering chuck and reverse jaws. Can stand and be used invert. a position with its own tailstock
- The range of boring bars, table clamps, other spindle tools, and accessories.
- Horizontal milling attachment with standard 1" arbor.
- 14 various 1" bore side/face cutters, slab mills, slitting saws, chipping cutters up to 200 mm diameter plus 15 x gear cutters.
- 16 x various end mills and slot drills.
- ER 32 AND ER 40 Collett chucks, accepts any end mill up to 26 m/m shank.
- 2 x 30 iso mounted boring heads, accept 12 and 18m/m diam. boring bars, 1 set of each size bars included.
- 2 x carbide tipped facing cutters
- Complete coolant system
- Low voltage work light
- Complete set of instruction books