Schaublin 102N-VM high precision lathe w/digital readout

  1. Managing Director
  2. Managing Director
  3. Managing Director
  4. Managing Director
  5. Managing Director
  6. Managing Director
  7. Managing Director
  8. Managing Director
  9. Managing Director
  10. Managing Director
  11. Managing Director
  12. Managing Director
  13. Managing Director
Built in Switzerland. Full screw cutting model on original factory cast iron base. 24 speeds from 45 to 3100 r.p.m. Distance between centers 450mm. Centre height (102.5mm), swing over bed 205mm. Bed width 130mm. 4-way tool post with dual-position mounting. Tailstock no.2 Morse with 110mm quill travel graduated & positive tang lock for drills. Built-in adjustment handles to alter feed rates whilst running and in the feed. The separate dial on headstock enables a variety of feed rates without changing gears. 2-speed motor with hi/low selector on the headstock. Fitted with 2-way digital readout.​
Very well equipped with 40 collets, collett holder as well as 30 change gears - four that are fitted and 26 spares (all in superb condition). Live and dead centers, drill chuck, 3 & 4 jaw chucks (Pratt Burnerd) with all keys. 3-jaw chuck diameter 100mm, 4-jaw chuck diameter 152mm with 40mm diameter center hole. Fixed steady. Fitted with pull down chuck guard. The center of base has 2 x sturdy swing out drawers for storing accessories.
Exceptionally good condition. All original paint. 3-phase/415V power with separate 240 Volt lead connected for D.RO. Highly sought after machine for precision work. Supplied strapped to timber pallet as shown for easy unloading. Inspect on our floor weekdays or weekends.

Cazeneueve HB575 2m b.c. lathe w/swiss tool post & accesories (built in France)

  1. Managing Director
  2. Managing Director
  3. Managing Director
  4. Managing Director
  5. Managing Director
  6. Managing Director
  7. Managing Director
  8. Managing Director
  9. Managing Director
  10. Managing Director
  11. Managing Director
  12. Managing Director
  13. Managing Director
  14. Managing Director
  15. Managing Director
Cazeneueve lathe. Built in France. Distance between centers 2000 m/m. Swing over bed 575 m/m diam. Width across bed 400 m/m. 18 speeds 20 to 1600 r.pm. English/metric screw cutting. Forward/reverse clutch.  Tailstock no. 5 Morse. Hollow spindle 51 m/m. Complete with 3 & 4 jaw chucks, fixed & traveling steadies, copy attachment, reducer sleeves. Full coolant system. Quiet running in all speeds. All slides are excellent. Rear tool post. Lead & plug on the machine ready to use. Rare precision tool room lathe.
  1. Managing Director
  2. Managing Director
  3. Managing Director
  4. Managing Director
Acra Turn lathe in stock. These were a quality make of machine built in Taiwan (not China). Distance between centres 800m/m. Swings 380 m/m diam. over hardened v-bed. Tailstock no.3 Morse. Speeds to 1800 r.p.m. Special model 240 volt with 3 h.p. main motor and brand new 240 volt coolant pump. Full range of accessories on pallet as shown including 3 & 4 jaw chucks (190m/m & 250 m/m diam.), reversing jaws, faceplate (305m/m diam.), fixed & travelling steadies, drill chucks, headstock bung and turning tools. All slides and lead screw are superb. Lead and plug on machine ready to use.

Acra Turn Lathe w/accessories

​​

The tailstock quill is a very smooth No: 5 morse with positive tang lock. Swings 840 m/m diameter in the gap with 92 m/m hollow spindle. ​ With Roller bearing spindle with self-adjusting chuck. And fixed and traveling steadies.
Weighs 4200 kg. 18/96" (460/ 2440 m/m) Lathe​. 380 m/m 3 jaw chuck with reverse jaws.
460 m/m 4 jaw steadies.-No. 5-4 & 5-3 morse reducer sachets.
 No. 5 Morse device for power drilling from the cross-slide.

​​

Dean Smith & Grace Lathe (Sold!

  1. Managing Director
  2. Managing Director
  3. Managing Director
  4. Managing Director
  5. Managing Director
  6. Managing Director
  7. Managing Director
  8. Managing Director